HZ250 75kW 250L Super Discharge Horizontal Bead Mill For Dyestuff Chemical Fiber
The main introduction of Bead Mill
1. The compact and stable structure : the motor is placed on the upper part, the grinding chamble is placed on the lower part, and the total height of the equipment is low. More than 20L large model sander with cylinder slide rail for easy maintenance.
2. Double end mechanical seal: It has 2 patented technologies, with forced coolant, sealing ring resistant to 1600 kinds of solvents, coolant is compatible with materials, no pollutants, reliable operation.
3. Discharging separation system :Large flow, nonclogging: dynamic hollow rotor-super large area slot cylinder separator uses dynamic centrifugal force separation principle.Use of extremely small grinding beads ( 0.3 to 3 mm).No export blockage occurs under high flow conditions. Good heat dissipation, narrowest particle size distribution.
4. Grinding inner chamble : It has two patented technologies: chamble cooling and disassembly. The chamber volume is from 0.6-300L. The materials are stainless steel, alloy steel, ceramic, hard alloy, polyurethane, etc.
The main techinical data Of Sand Mill Machine:
| No | Main parameters | HZ250 | Note |
| 1 | Explosion-proof motor kW | 75 kW ( Ex) | |
| 2 | Effective volume of grinding chamber (L) | 250 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 2100*900*2000 | |
| 6 | Weight (kg) | 3000 | |
The main Configuration instructions of Sand mill Machine:
| No | Main parts materials | SP250 ex-proof | Notes |
| 1 | External cylinder | 304 stainless steel | |
| 2 | Internal cylinder | 9Cr18Mo alloy steel | customized service offered |
| 3 | Dispersing shaft | 40Cr with hard chromium plating | |
| 4 | Dispersing disk | Cr12Mov alloy steel | |
| 5 | Feeding and discharging end covers on the cylinder | 304 stainless steel | |
| 6 | centrifugal separator and pins | 304 stainless steel and YG6 pegs | |
| 7 | Static discharge screen ring | Stainless Steel Wire Wrapped Screen.Gaps: 0.5mm. | |
| 8 | Mechanical seal | double end mechanical seal with mandatory lubricating-cooling system | |
| 9 | Feeding pump | 1.5” ARO diaphragm pump; | |
| 10 | Appliance configuration | Ex-proof machine, suitable for water/oil based materials, motor 55kW. Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves.operation manner: (button type) | |
| 11 | Fasteners and connecting parts | Stainless steel clamp-type connecting parts | Quick and convenient |
The working principle:
The working principle is to use the material pump to feed the solid-liquid mixture material that has been pre-dispersed and wetted by the mixer into the chamber, and the material and the grinding medium in the chamber are stirred by the high-speed rotating disperser, so that the solid particles in the material and the grinding media produce stronger collision, friction, and shearing effects with each other to achieve the purpose of accelerating the grinding of fine particles and dispersing .After grinding and dispersing, the material passes through a dynamic separator to separate the grinding medium and flows out of the discharge pipe.
The package and shipping: Be covered with anti-abrasion film and then packed in wooden boxes, then seashipping by FCLor LCL.
Also offered the related products: Dispersing machine & the Zirconical beads, This 2 products are much important for the Bead mills, this materials is pre-dispersing well, It's better for grinding with bead mill after pre-dispesing well. Also the zirconia beads (grinding beads with different size for meeting different finally fineness.
The Package of wooden boxes:
Note:
1.We will recommend the suitable bead mills according to your information and demand, such as industry, fineness, temperature, viscosity,production capacity etcs.
2. The Materials of inner chamber and Dispersing disks can be chosed according to your different grinding materials and industries.
3. The control system will be matching of different demand, such as PLC or traditional Button type.
If need more detailed information and Price, please don't hesitate contact us, Also Warmly welcome to visit us.
Product Tags:
|
|
HZ250 75kW 250L Super Discharge Horizontal Bead Mill For Dyestuff Chemical Fiber Images
|
