1.5"ARO Feed Pump Paint Oil Ink Paper making 55kW 200Litre Horizontal Bead Mill With 0.8-1.5T/H
The main introduction:
1. High independent technology: This Sand grinding mills are main consists of chamber and disc dispersing system. The double end mechanical sealing with independent technology could resistant to more than 1600 kinds of solvents.
2. Urtra fineness: The series have great flow rate and super fine discharging, the finally fineness can be reach 1um for D90 .
3. Better Cooling system:The cooling efficiency is better than normal mills because the sectional double spiral water course is more beneficial to heat exchange.
4. High Efficiency: The grinding efficiency is higher 15-30% than traditional mill machines; the combined disperser can rapidly increase dispersing efficiency.
5. Different materials chosed for inner chamber and dispersing discs: All the materials of contact parts could be chose from wearable steel, stainless steel, PU and ceramics for meeting different requirements.
6. Bigger and Smaller grinding media for different needs: The grinding media is extremely from 0.3-3.0mm are suitable for this series mills. We recommend the 95% zirconium beads. The discharging is great flow with bigger screen rings which can be easily cleaned and removed.
The main techinical data:
| No | Main parameters | SP200 | Note |
| 1 | Non Explosion-proof motor kW | 55 kW (Non Ex) | |
| 2 | Effective volume of grinding chamber (L) | 200 | |
| 3 | Water pressure (MPa) | 0.3 | |
| 4 | Cooling water consumption (L/min) | 2.5 -3m3/h | Advise offer the Cooling water less 10°C |
| 5 | Dimensions:L*W*H (mm) | 2000*900*2000 | |
| 6 | Weight (kg) | 2000 | |
The main Configuration instructions:
| No | Main parts materials | SP200 Non Explosion-proof | Notes |
| 1 | External cylinder | 304 stainless steel | |
| 2 | Internal cylinder | PU coated 304 stainless steel | |
| 3 | Dispersing shaft | 40Cr with hard chromium plating | |
| 4 | Dispersing disk | PU coated 304 stainless steel | |
| 5 | Feeding and discharging end covers on the cylinder | 304 stainless steel | |
| 6 | Turbine centrifugal separator and pins | 304 stainless steel and YG6 pins | |
| 7 | Static discharge screen ring | Wire Wound screen ring with 304.Gaps: 0.5mm. | |
| 8 | Mechanical seal | Intelligent double mechanical seal with mandatory lubricating-cooling system | |
| 9 | Feeding pump | 1.5” ARO diaphragm pump; | |
| 10 | Appliance configuration | Non Explosion-proof machine, suitable for water base materials, motor 55kW. Non Explosion-proof parts: operation column,electrical appliance boxes;electric contact pressure gauge, temperature,solenoid valves with NO ex electrical contacts., Control system (button type) | |
| 11 | Fasteners and connecting parts | Stainless steel clamp-type connecting parts | Quick and convenient |
The detailed production show:
Also offered the related products: Dispersing machine & the Zirconical beads, This 2 products are much important for the Bead mills, this materials is pre-dispersing well, It's better for grinding with bead mill after pre-dispesing well. Also the zirconia beads (grinding beads with different size for meeting different finally fineness.
Note:
1.We will recommend the suitable bead mills according to your information and demand, such as industry, fineness, temperature, viscosity,production capacity etcs.
2. The Materials of inner chamber and Dispersing disks can be chosed according to your different grinding materials and industries.
3. The control system will be matching of different demand, such as PLC or traditional Button type.
If need more detailed information and Price, please don't hesitate contact us, Also Warmly welcome to visit us.
Product Tags:
|
|
1.5 ' ARO Feed Pump Horizontal Bead Mill 1.5T Grinding Mill Machine Images
|
